Washington's EV Charger Rule Spells Out Three Penalty Risks for Public Works

A rule effective November 20 separately addresses uncertified installers, their employers and designated master electricians or administrators—but the underlying certification law took effect in January.

This report reflects information available at publication or its last update; circumstances may have changed since then.

More Policy & Regulation coverage →

Washington's public-works EV charger certification rule took effect November 20, and its enforcement language identifies three different responsibilities: the person doing covered work, the employer hiring that person, and the designated master electrician or electrical administrator. Each is addressed separately in the state's adopted rule, with references to civil-penalty provisions. This is a statement of possible violations—not a report that any contractor has been fined.12

The timing matters. The underlying certification obligation already took effect January 1, 2026, under Substitute Senate Bill 5528. The Department of Labor & Industries (L&I) adopted implementing amendments October 20, effective November 20. The November rule is not a new blanket training requirement for everyone installing a residential charger.132

Three roles, three separate violation provisions

The adopted WAC 296-46B-941 specifies how certification failures can involve more than the worker alone. Its subsections (4), (5) and (6) describe distinct violations for covered EV charging work.1

Role What the adopted rule treats as a violation Civil-penalty cross-reference
Person doing covered EVSE installation or maintenance Performing work without the required valid EVITP or L&I-approved comparable certification, when the requirement applies WAC 296-46B-941(4) → 296-46B-915(14)
Employer Employing someone to install or maintain covered EVSE without the required certification WAC 296-46B-941(5) → 296-46B-915(14)
Designated master electrician or electrical administrator Failing to ensure that people installing covered EVSE have the required certification WAC 296-46B-941(6) → 296-46B-915(12)(d)

The table is At The Charger's comparison of three clauses in the adopted State Register text. The third clause expressly addresses people installing equipment; it should not be broadened into a claim that every administrative failure during maintenance falls under the same provision. The references identify possible civil-penalty routes, but these clauses do not establish that anyone has received a citation, and they do not state a particular assessed dollar amount.1

Which EV charging jobs and workers are covered?

The certification requirement concerns electrical-component work during installation and maintenance of EV supply equipment on public works, as defined under Washington's public-works statute, RCW 39.04.010. It is not triggered merely because a charger is publicly accessible, and this specific section does not establish a statewide EVITP-only rule for private-home installations. Whether a particular project qualifies as public works requires its actual contract and legal classification.13

The rule also contains qualifications that change the answer for individual workers and projects:

  • Certified or appropriately supervised: Covered workers may have EV Infrastructure Training Program (EVITP) certification or certification through a similar nationally recognized program approved by L&I. Qualifying apprentices may work under a journey-level electrician with the specified certification; the exception is not an exemption for all unsupervised apprentices.13
  • Older contracts: EVSE installations already under contract before January 1, 2026 are excluded from this specific certification requirement. The controlling cutoff is the contract date, not the eventual construction date.13
  • Alternative programs: A nationally recognized program cannot simply declare itself equivalent. L&I must approve it, and program approval expires every three years. That three-year period applies to agency approval of the training program; it should not be mistaken for every individual worker's credential term.1

The section also conditions the certification requirement on EVITP or a comparable program remaining open to all journey-level electricians. The adopted November package contains other electrician and administrator examination amendments, but the three-role comparison above concerns the public-works EVSE provision specifically.12

For a contractor reviewing a Washington charging bid, the practical sequence is therefore to determine whether the work is covered public works, check whether the installation was under contract before January 1, confirm the applicable worker certification or supervised-apprentice pathway, and identify who carries the employer and designated-master/administrator responsibilities. The adopted text supports those checks; it does not by itself identify particular noncompliant projects, calculate added project costs or establish current enforcement outcomes.13

Sources

Footnotes

  1. Washington State Register, Issue 26-21, WSR 26-21-073, Department of Labor & Industries Order 25-20, adopted October 20, 2026, effective November 20, 2026; especially WAC 296-46B-941 (printed pp. 126–127). https://lawfilesext.leg.wa.gov/law/wsr/2026/21/26-21PERM.pdf — Primary adopted rule for covered roles, exceptions, violation categories, civil-penalty cross-references, training-program approval, and the regulation's effective date. The cited provisions describe potential violations, not assessed fines or particular enforcement cases. ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10

  2. Washington Department of Labor & Industries, Electrical Rules: EVSE (SSB 5528 Implementation) & Competency Exams, concise explanatory statement, September/October 2026. https://lni.wa.gov/rulemaking-activity/ao25-20/2520ces.pdf — Primary agency explanation distinguishing October 20 rule adoption and November 20 administrative effective date from the underlying January 1 statute. The controlling WAC and enacted law govern exact legal duties. ↩ ↩2 ↩3

  3. Washington State Legislature, Substitute Senate Bill 5528, Chapter 233, Laws of 2025, approved May 12, 2025, effective January 1, 2026. https://lawfilesext.leg.wa.gov/biennium/2025-26/Htm/Bills/Session%20Laws/Senate/5528-S.SL.htm — Enacted law for the original public-works/electrical-component certification scope, supervised apprentices and the pre-effective-contract exception. ↩ ↩2 ↩3 ↩4 ↩5